File name: Pandora106s1_Innsbruck_20231221_L2Fit_fsus1c9d20221125p1-8.txt
File generation date: 20240119T010345.3Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c9p1-8
Local principal investigator: Martin Tiefengraber
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 106
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora106_OF_v2d20210701.txt
Instrument calibration file used: Pandora106s1_CF_v9d20221125.txt
Level 1 file used: Pandora106s1_Innsbruck_20231221_L1_smca1c9d20221125p1-8.txt
Full location name: Innsbruck Atmospheric Observatory
Short location name: Innsbruck
Country of location: Austria
Location latitude [deg]: 47.2643
Location longitude [deg]: 11.3852
Location altitude [m]: 616
Local noon date: 20231221
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Modification of session 6 "based on session5: fieldCal for IAO 2022" fieldcal Nov 2022 new refday
First and last pixel inside fitting window: 242 387
Nominal wavelengths inside fitting window [nm]: 306.0580 306.1989 306.3398 306.4807 306.6215 306.7624 306.9032 307.0441 307.1849 307.3257 307.4666 307.6074 307.7481 307.8889 308.0297 308.1705 308.3112 308.4519 308.5927 308.7334 308.8741 309.0148 309.1555 309.2962 309.4368 309.5775 309.7181 309.8588 309.9994 310.1400 310.2806 310.4212 310.5618 310.7024 310.8430 310.9835 311.1241 311.2646 311.4051 311.5456 311.6861 311.8266 311.9671 312.1076 312.2481 312.3885 312.5290 312.6694 312.8098 312.9502 313.0906 313.2310 313.3714 313.5118 313.6521 313.7925 313.9328 314.0732 314.2135 314.3538 314.4941 314.6344 314.7747 314.9149 315.0552 315.1955 315.3357 315.4759 315.6161 315.7564 315.8966 316.0367 316.1769 316.3171 316.4573 316.5974 316.7375 316.8777 317.0178 317.1579 317.2980 317.4381 317.5782 317.7182 317.8583 317.9983 318.1384 318.2784 318.4184 318.5584 318.6984 318.8384 318.9784 319.1184 319.2583 319.3983 319.5382 319.6781 319.8180 319.9579 320.0978 320.2377 320.3776 320.5174 320.6573 320.7971 320.9370 321.0768 321.2166 321.3564 321.4962 321.6360 321.7758 321.9155 322.0553 322.1950 322.3347 322.4745 322.6142 322.7539 322.8936 323.0332 323.1729 323.3126 323.4522 323.5918 323.7315 323.8711 324.0107 324.1503 324.2899 324.4294 324.5690 324.7086 324.8481 324.9876 325.1272 325.2667 325.4062 325.5457 325.6851 325.8246 325.9641 326.1035 326.2430 326.3824
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 157: Temperature in head sensor [°C], 999=no temperature signal
Column 158: Azimuth motor temperature [°C], 999=no temperature signal
Column 159: Zenith motor temperature [°C], 999=no temperature signal
Column 160: Humidity in head sensor [%], -9=no humidity signal
Column 161: Pressure in head sensor [hPa], -9=no pressure signal
Columns 162-307: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 308-453: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20231221T084250.6Z 8755.363086 156 1 51.58 2 78.31 145.33 118.63 38.25 0.00 1 0.00 1 7 259 3.080e-01 5.392e-02 1.142e-01 9.661e-03 -1.079875e-05 4.061758e-06 1.717244e-06 3.646994e-07 1.504500e-04 221.45 -2.00 3.66 -2.00 323.30 0.00e+00 3.644656e-03 1.801533e-03 7.379111e-04 1.300164e-05 3.989248e-02 268.12 -2.00 20.00 -2.00 323.83 0.00e+00 4.491090e-03 2.190543e-03 9.810345e-04 2.498241e-05 7.282095e-02 268.12 -2.00 20.00 -2.00 322.84 0.00e+00 6.123917e-02 4.589967e-03 3.843532e-03 1.278745e-05 7.419640e-02 268.12 -2.00 20.00 -2.00 323.13 0.00e+00 4.101969e-01 2.764793e-02 1.422051e-02 4.749671e-04 5.122396e-01 142.18 14.62 0.00 0.09 289.92 320.74 0.00e+00 -2.001601e-04 2.040144e-03 4.877296e-03 1.576705e-05 1.162511e-02 268.12 -2.00 20.00 -2.00 320.08 0.00e+00 4.783 0.002 303.00 329.40 4 4.8335e+00 5.2400e-02 6.4033e-02 1.8782e-03 1.4832e+00 -3.4187e-01 9.7496e-02 9.3922e-02 2.1500e-04 1.6198e+00 -2.5849e-02 5.1292e-02 4.2487e-02 8.9087e-05 8.8675e-01 3.3969e-01 1.8606e-02 1.0009e-02 3.2178e-05 2.9303e-01 -1.9638e-01 9.9947e-03 1.1081e-03 6.7531e-05 1.8662e-01 2.1204e-05 2.4193e-02 1.0008e-06 2.0708e-08 1.2915e-10 3.6094e-07 -5.0555e-03 4.6219e-04 1.2825e-04 1.0757e-06 1.3375e-02 8.8233e-02 0.0000e+00 1.6530e+00 8.1345e-01 2.7202e-01 1.5144e-03 1.5618e+01 12 11 8 11 32 0 99.97 17.50 -1.50 0.08823 0.04966 14 3 1 5 0 3683.730 21.69 15.00 17.50 9.90 41.60 39.80 44.8 919.97 -1014 152610 37818 24791 -38983 77969 44956 11543 -1783 47017 12923 125956 84308 -54280 7860 -36059 53818 44700 14007 3134 40009 -25734 -33308 1044 -49101 6086 84877 91008 7605 124988 8164 105 11142 53009 5199 -26122 15263 2909 32723 -5719 9084 22831 53617 -13276 600 -6018 -4154 -17261 25311 14187 -11183 21302 14236 -6871 19959 5591 24843 33385 5438 775 11238 175 -7654 -15752 9556 12242 2839 -3683 -3456 12016 2747 -7946 -30651 3906 3722 -2034 14327 -2196 -13535 3589 9366 -11951 -2416 -245 7112 -5564 4411 -4106 12554 3396 -2391 1756 6453 -1021 -1016 -2244 54 -2771 5669 -1338 1968 8882 4284 -11044 292 2939 -1105 4257 -3932 478 1312 3306 1051 -421 5272 1484 509 -8798 4868 -5285 9218 -6837 4749 1742 -1600 -2371 1641 -455 -697 -1733 1713 -167 832 466 -3114 -535 -2976 3079 -41 2140 -222 -1251 541 -1861 2211 900000 -9 2919 2327 1409 -4161 3891 2732 1000 -187 3349 1222 5761 5784 -9155 757 -5454 3622 3330 1307 313 2823 -3186 -4510 106 -8774 657 4898 5412 872 7318 1170 19 1957 6563 1078 -7064 2923 630 5249 -1350 1861 4163 7488 -3822 160 -1809 -1284 -5901 6159 3885 -3942 5469 4055 -2577 6232 2179 8363 10404 2202 325 4345 75 -3785 -8862 4522 5555 1361 -1788 -1595 4705 1240 -4129 -22571 2273 2362 -1454 9133 -1725 -12320 2799 6870 -10557 -1853 -174 4530 -4037 3064 -3432 10006 3307 -2497 1801 6537 -1052 -991 -2168 52 -2844 5614 -1506 2291 10394 5298 -16705 401 3877 -1465 5152 -5064 592 1652 4187 1378 -557 6827 1927 641 -11701 5536 -6753 10735 -9455 6290 2523 -2519 -3954 2763 -819 -1229 -3144 2997 -308 1462 789 -5344 -902 -5366 5606 -79 4424 -508 -2918 1293 -4657 5384 900000
SS 20231221T091211.6Z 8755.383468 172 1 45.06 2 75.71 151.70 115.33 45.17 0.00 1 0.00 1 0 97 6.449e-02 1.591e-02 2.133e-02 2.936e-03 -1.094009e-06 1.223503e-06 3.907059e-07 3.646134e-07 3.219715e-05 221.45 -2.00 3.66 -2.00 322.75 0.00e+00 -1.341749e-03 5.162960e-04 4.598610e-04 1.301921e-05 8.366208e-03 268.12 -2.00 20.00 -2.00 322.94 0.00e+00 1.034969e-02 6.263194e-04 1.840698e-04 2.502771e-05 1.534961e-02 268.12 -2.00 20.00 -2.00 322.39 0.00e+00 1.453920e-02 1.234203e-03 1.743258e-03 1.290082e-05 1.553928e-02 268.12 -2.00 20.00 -2.00 322.58 0.00e+00 5.389351e-01 7.419964e-03 8.487189e-03 4.757815e-04 1.063730e-01 219.69 2.74 0.00 0.07 170.62 320.11 0.00e+00 1.605915e-03 5.042709e-04 2.357449e-03 1.575896e-05 2.408701e-03 268.12 -2.00 20.00 -2.00 319.27 0.00e+00 3.967 0.001 303.00 329.40 4 3.8241e+00 1.6184e-02 4.1577e-02 1.8806e-03 3.1076e-01 2.6747e-01 2.5463e-02 4.8491e-02 2.1635e-04 3.3974e-01 -2.7967e-01 1.5465e-02 2.6006e-02 6.7861e-05 1.8459e-01 2.1709e-01 8.5839e-03 1.0472e-02 7.3878e-05 6.3928e-02 -6.2837e-02 3.6773e-03 1.3111e-03 8.3480e-05 4.2106e-02 1.4179e-04 2.6490e-02 2.8887e-03 6.0720e-04 1.0523e-05 2.2787e-03 -6.9137e-04 1.3300e-04 8.7275e-05 1.0818e-06 2.8000e-03 5.0318e-02 0.0000e+00 5.4099e+00 2.8941e-01 1.3613e-01 9.3251e-04 3.6235e+00 12 9 9 12 33 1 99.97 17.51 -0.42 0.05032 0.04504 19 4 1 5 0 2252.630 21.69 15.00 17.51 11.35 41.10 39.60 44.5 924.44 -10389 -8575 -32543 -23349 -35269 -1499 -5193 -1947 -705 3824 -154 17591 8212 -14717 1195 -5919 -11740 1274 -4238 -3885 -3250 -10447 -10120 -8275 -13030 -3625 8767 7986 -286 13348 6516 -10318 3895 11664 2577 -713 4555 3096 5635 256 1559 3273 7018 -1081 3091 1014 177 -1753 4644 1450 -3027 2309 -1980 -419 2715 -11 2128 1746 526 -32 1689 -523 -1895 -4156 -1060 1058 -375 -62 -89 1541 180 -1809 -6103 690 360 -958 2777 -23 -2529 30 -592 -3232 -1954 -1379 -52 -1155 -174 1166 1710 -2797 -474 -548 527 270 1097 850 1015 -576 1370 -275 214 704 -1179 9205 -1989 -1327 -860 1104 115 740 278 1201 698 984 1250 -277 -886 -371 538 -983 -522 -1457 266 -919 -647 -133 205 -55 -308 -285 -996 -584 169 -57 292 81 -533 -6 -773 590 22 205 180 250 330 900000 -260 -237 -1493 -1034 -2220 -67 -310 -132 -53 293 -13 1212 665 -1533 110 -612 -1348 126 -454 -409 -333 -1191 -1206 -1044 -1778 -505 1087 1036 -41 1988 1152 -2561 923 2737 701 -207 1264 880 1561 76 458 970 2106 -356 1048 376 69 -726 1828 592 -1293 938 -867 -191 1284 -5 1060 883 267 -16 886 -302 -1196 -2674 -671 681 -234 -36 -49 803 98 -1098 -4122 487 280 -772 2291 -21 -2308 27 -542 -2971 -1784 -1184 -42 -934 -146 1052 1631 -2952 -523 -620 578 297 1148 878 1063 -636 1483 -322 265 885 -1603 11706 -2738 -1784 -1162 1413 147 948 369 1634 974 1368 1691 -366 -1125 -472 666 -1252 -661 -1987 382 -1356 -1004 -206 335 -91 -525 -494 -1738 -996 277 -94 476 134 -888 -10 -1443 1138 43 436 383 543 727 900000